Pioneer Ddj Rz Traktor Pro 2 Mapping

  
Pioneer Ddj Rz Traktor Pro 2 Mapping Rating: 4,2/5 909 reviews
Hello.
I bought a DDJ-RX controller and before buying I'd thought that it was compatible with the Traktor Pro 2 but I was wrong. I searched the Pioneer forums and a staff told me that Pioneer would not release an official mapping for DDJ-RX. After that I tried mapping for my new controller but beside the basic mappings (start, cue, syns etc.) I couldn't map the FX s, performance pads etc.
Could anyone who knows about mapping help me doing it or help me to find a full DDJ-RX mapping for Traktor Pro 2?
Thank you.

Starting with Deck A (4 descks supported), top/left:

DECKS

Pioneer DDJ-RZ Rekordbox Software DJ Controller Boxed + License Key This unit is in very good full working condition. It comes complete with original box, power cable, USB cable and rekordbox code. One of the best Pioneer controllers on the market. Very minor wea. Aug 08, 2013 Home Traktor 2 Mappings Mapping Templates All Mappings Upload Mapping Info. Mapping(s) for Pioneer, DDJ-T1. Original Pioneer tsi: Pro - Version 2.5: Downloads. This Setting File is required when Native Instruments TRAKTOR PRO 2 Ver.2.6.0 is used with DDJ-WeGO. There are some precautions before using. Before use: Need to update DDJ-WeGO Firmware to the latest one(Ver.1.05 or later). Need to update TRAKTOR PRO2 to Ver.2.6.0. Refer to Hardware diagram below for TRAKTOR PRO 2. Hardware diagram for TRAKTOR.

EFFECTS SECTION

  • FX PANEL -> NOT USED

  • FX KNOB 1 -> DRY/WET (FX Unit 1)

  • FX KNOB 2 -> PARAMETER 1 (FX Unit 1)

  • FX KNOB 3 -> PARAMETER 2 (FX Unit 1)

  • Release FX Encoder -> PARAMETER 3 (FX Unit 1)

  • FX Button 1 -> FX UNIT 1 ON/OFF

  • FX Button 2 -> Whatever selected effect provides

  • FX Button 3 -> Whatever selected effect provides

  • Left Beat -> Whatever selected effect provides

  • Right Beat -> NOT USED

  • Effects Panel on Deck B/D is FX Unit 2.
  • Browse Encoder Knob -> Works as expected (PUSH is unused at the moment)
  • Load Button -> Loads track into corresponding deck (and unloads track in preview deck if there is one)
  • Back Button -> Loads and starts selected track into preview deck (press again to unload)(Use the Cross Fader to seek through the preview track) - I have no other use for the X-Fader
  • Shift Combo's NOT USED

  • (Shift) Slip Reverse -> NOT USED

  • Slip -> Toggle FLUX mode

  • Vinyl (shift Slip -> Toggle Vinyl Mode (Native function)

  • GRID Adjust -> Grid Adjust/Tap (if auto analyze gets the down beat wrong, you can correct it with this button - tap 4 beats starting with the downbeat as it should be to correct it)

  • SLIDE -> NOT USED

  • Shift Combo's -> NOT USED

  • Deck Buttons -> Works as expected (Native function)

  • Jog -> Works as expected. Some latency, and the display doesn't work yet

  • Master Tempo -> Key Lock

  • Shift Master Temp -> Key Lock (Preserve Pitch)

  • Tempo Slider -> Works as expected, but up/down indicators don't work yet

  • Sync -> Works as expected

  • Shift Sync -> Works as expected

  • Quantize -> Toggle Quantize (Global)

  • Sequencer -> NOT USED

  • Cue/Play -> Works as expected

PERFORMANCE BUTTONS

  • Hot Cue Button -> Select Hot Mode
  • Shift Hot Cue Button -> Select Beat Jump Mode (Top Row: +4, +8, +16, +32 Bottom Row: -32, -16, -8, -4)
  • Hot Cue Buttons -> Set/Select Hot Cue
  • Shift Hot Cue -> Delete Hot Cue
  • Pad FX, Slicer, Sampler modes -> NOT USED
  • Capture -> NOT USED

Loop Section:

  • Auto Beat Loop -> Set/enable Loop

  • Shift Auto Beat Loop -> Activate Auto Loop (will latch on to first loop cue point in track)

  • 1/2x Button -> Loop/2

  • 2x Button -> Loop*2(shift combo's not yet implemented)

  • In/Out Button -> Start/End Loop Points

  • Parameter1 Buttons -> NOT USED

MIXER SECTION

  • Mic Section -> Not touched, untested, no idea how this reacts now (might just work because native)
  • Sampler Section -> Not touched, untested, no idea how this reacts now (might just work because native)
  • Sound Color FX -> Can not use (native function, no MIDI signals)
  • Headphone Section -> Works as expected

Pioneer Ddj Rz Traktor Pro 2 Mapping Ableton

MIXER CHANNELS

  • All functions work as expected, with the exception of the CUE buttons - pressing the CUE button will enable the FILTER knob. Use SHIFT CUE to enable pre-listen on headphone.
  • Cross Fader is only used for seeking in the PREVIEW TRACK (see Browse/Load section)Note: when starting Traktor, the hardware faders will not force their position in Traktor. Touch them to do that (haven't found a way to force this yet).

Master/Booth Bnobs -> Work as expected (Native Function)Filter on Main -> Can not be used

OSC Sampler -> Works as expected (Native Function) (no idea yet how we can change the samples as in RB)

To IMPORT into Traktor:

Pioneer Ddj Rz Traktor Pro 2 Mapping For Virtual Dj

Click Settings, Controller Manager, Add, Import TSI, Import Other, browse to file and load it.It should show as 'DDJ-RZ - Generic MIDI', In-Port & Out-port: DDJ-RZ (DDJ-RZ), Device Target: Focus

Pioneer Ddj S1 Dj Controller

Traktor Pro 2 Trial

ONLY tested on Mac. Traktor Version 2.11.1 (28)