• This topic has 10 replies, 1 voice, and was last updated 7 years, 9 months ago by .

• I have traktor pro 2 installed and my hercules e2 controller works fine with it, all controls are fine but no sounds played through traktor play.
  Under Audio setup i have the following settings:
  Audio device: ASIO4ALL v2
  Sample rate: 24000Hz
  Latency: 512

  Then under the ‘Built in soundcard’ bit i have ASIO4ALL selected again. The only other choice being something called” Conexant 20561 smartaudio ( (Wassapi) (Shared mode))”

  I have no idea what to do with input & output routing, but have had no luck with just guessing. could really use some help people. if you need any more info, let me know. thanks

  On Audio Setup, select “ASIO4ALL” for audio device. Then, on Output Routing, select “Internal” for mixing mode, on Out Master select 1: Front Left, then 2: Front Right. Output Monitor should be 3: Back Left, then 4: Back Right.

  Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

  So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

  Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

  If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

  Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

  So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. /fabfilter-micro-vst-download.html. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

  Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

  If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

  Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. What does auto tune tv mean. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

  So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

  Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

  If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

  3D 5.1 soundcards will work as long as you have two separate outputs. But, if you want to connect it to high-powered mixers and speakers, then I recommend buying a DJ soundcard from numark or native instruments. That way there would be no distortion if you pump up the volume.

• Posts

Jul 05, 2012 Traktor Pro 2 has all the standard features that you would find on a standard DJ mixer built into the software mixer. Before you can use the headphone cue options, you need to correctly set up. Apr 30, 2012  How to configure headphone booth monitor preview with external sound card in Traktor 2 tutorial 2012. Configurar Audio de Mixtrack Pro en Traktor. How to setup Headphones Mixtrack pro. Feb 17, 2012  Setting up basic speakers with traktor. Skip navigation. How to setup Audio with Traktor RevocationTV. Traktor Pro Guide - Preferences Pt 1/4: Audio Setup + Timecode Configuration.

Bluetooth Adapter For Laptop

• The forum ‘DJing Software’ is closed to new topics and replies.

Hp Laptop With Bluetooth